codealive-ai / mcp-management

MCP Server Management

IMPORTANT: After adding, removing, or updating MCP servers, inform the user to restart the affected agent for changes to take effect.

CRITICAL: Before removing any server, use AskUserQuestion to confirm with the user.

Quick Reference (Claude Code)

# Install
claude mcp add --transport http <name> <url>
claude mcp add --transport stdio <name> -- <command> [args...]
claude mcp add-json <name> '<json>'              # Full JSON config in one shot

# List/inspect
claude mcp list
claude mcp get <name>

# Remove (confirm with user first!)
claude mcp remove <name>

# OAuth login/logout (for OAuth-protected HTTP servers)
claude mcp login <name>
claude mcp logout <name>

Options must come BEFORE the server name. As of 2026-04, --transport http (Streamable HTTP) is recommended; sse is end-of-life.

Plugin MCP servers connect automatically at session start. Use /reload-plugins to re-init after enabling/disabling a plugin mid-session.

Multi-Agent Installation (npx add-mcp)

Install MCP servers to multiple coding agents at once using add-mcp:

# Remote server (HTTP)
npx add-mcp https://mcp.example.com/mcp

# npm package (stdio)
npx add-mcp @modelcontextprotocol/server-postgres

# Local command
npx add-mcp "npx -y @org/mcp-server --flag value"

# SSE transport
npx add-mcp https://mcp.example.com/sse --transport sse

Options

Supported Agents

Codex App / Desktop caveats

Codex has two relevant surfaces:

• Codex CLI (codex mcp list, codex mcp get, codex mcp login) can see and validate
  MCP configuration from the CLI process.

• Codex App / Desktop threads receive MCP tools only when the app starts a thread with
  those servers loaded and authenticated. A server can appear in codex mcp list but still
  be absent from the current model turn's tool list if the thread was created before the
  server was added, authenticated, or reloaded.

When configuring MCP for Codex App:

1. Prefer project-level .codex/config.toml when the user explicitly asks for repo-level
   setup. The project must be trusted in ~/.codex/config.toml under
   [projects."/absolute/path"] trust_level = "trusted".

2. For HTTP servers that use OAuth, run:
   `bash
   codex mcp login <server-name>
   `
   Then verify codex mcp list shows Auth: OAuth.

3. For HTTP servers that use bearer tokens, prefer Codex's native bearer-token env form
   over hardcoding a header:
   `bash
   codex mcp add <name> --url https://example.com/mcp --bearer-token-env-var EXAMPLEAPIKEY
   `
   If writing .codex/config.toml directly, this is the expected shape:
   `toml
   [mcp_servers.example]
   type = "http"
   url = "https://example.com/mcp"
   bearertokenenvvar = "EXAMPLEAPI_KEY"
   `
   Some third-party installers write http_headers.Authorization = "Bearer ${EXAMPLE_API_KEY}";
   Codex CLI may display this as a bearer-token server, but the native field is clearer.

4. After adding, removing, editing, or logging in to a Codex App MCP server, tell the user to
   fully restart Codex App. Existing threads can receive newly available tools after the app
   restart; create a new thread only as a fallback if tool_search still cannot find the
   server tools in the existing thread.

5. Verification has two levels:
   `bash
   codex mcp list
   codex mcp get <server-name>
   `
   confirms Codex CLI/config/auth. Inside a Codex App thread, also use tool_search for a
   server-specific tool name (for example supabase execute_sql or render list_services).
   If tool_search returns no tools while codex mcp list is correct, the issue is usually
   App/thread reload or the server being configured only in a scope the App did not load.

6. If project-level .codex/config.toml is not being picked up by Codex App, as a temporary
   diagnostic duplicate the server in user-level ~/.codex/config.toml, restart the App, and
   confirm tools appear. Remove the user-level duplicate afterward if the user wanted repo-only
   setup.

Examples

# Install to Claude Code and Cursor only
npx add-mcp -a claude-code -a cursor https://mcp.stripe.com

# Install npm package to all agents, globally
npx add-mcp -g --all @modelcontextprotocol/server-postgres

# Install with custom name and headers
npx add-mcp -n my-api --header "Authorization: Bearer TOKEN" https://api.example.com/mcp

# List available agents
npx add-mcp list-agents

See [references/multi-agent.md](references/multi-agent.md) for agent-specific config paths, formats, and transformations.

Searching for MCP Servers

When users ask to find or install an MCP server, see [references/search.md](references/search.md) for:

• Official vendor server lookup (always try first)
• MCP Registry API queries (fallback)
• Known official servers table
• User choice template format

Trust hierarchy: Official vendor > MCP reference servers > Verified partners > Community

Adding Servers (Claude Code)

With Environment Variables

The --env CLI flag is unreliable with special characters. Instead:

1. Add server without env vars:
   `bash
   claude mcp add --transport stdio <name> -- npx -y @package/mcp-server
   `

2. Edit config file to add env vars. See [references/scopes.md](references/scopes.md) for file locations.

Collect Configuration First

Before installing, check if the server needs API keys or tokens. Use AskUserQuestion to collect required values before running install commands.

Updating Servers

No direct update command exists. Options:

1. Edit config directly (preferred for credential changes)
2. Remove and re-add (confirm removal with user first)
3. Use environment variables for credentials that change often

For OAuth servers (GitHub, Sentry): Run /mcp in Claude Code to re-authenticate.

Removing Servers

Always confirm with user via AskUserQuestion before removing.

claude mcp remove <server-name>

For project-scoped servers in .mcp.json, delete the entry from the file after user confirmation.

OpenCode-specific notes

For OpenCode (anomalyco/opencode v1.14.x):

• Top-level key is mcp (not mcpServers); each server must declare type: "local" or type: "remote"
• For local servers, command is a single array ["bin", "arg1", "arg2"] — there's no separate args field
• Env vars go under environment (not env)
• Per-server enabled: false disables without removing
• Use opencode mcp auth <name> / opencode mcp logout <name> for OAuth servers (e.g., GitHub)
• Plugin tool.execute.* hooks do not fire for MCP tool calls in v1.14.x — use permission rules instead

See [references/opencode-mcp.md](references/opencode-mcp.md) for the full OpenCode MCP reference.

Reference

• Search and known servers: [references/search.md](references/search.md)
• Multi-agent installation: [references/multi-agent.md](references/multi-agent.md)
• OpenCode MCP: [references/opencode-mcp.md](references/opencode-mcp.md)
• Transport types: [references/transports.md](references/transports.md)
• Scopes and config files: [references/scopes.md](references/scopes.md)
• Troubleshooting: [references/troubleshooting.md](references/troubleshooting.md)

Scopes Summary (Claude Code)

Environment Variable Syntax

In config files: ${VAR} or ${VAR:-default}

Windows Note

Use cmd /c wrapper for npx:

claude mcp add --transport stdio my-server -- cmd /c npx -y @some/package